2401 Oberlin RoadYreka, California 96097
Phone: 800 795-9671 Fax: 530 842-3238
E-Mail:Ozotech, Inc.
Mobile Ozone Microbial Reduction System
Features:
|
|
- Engineered for "turn-key" operation
- All stainless steel frame
- Will accept a wide range of incoming water pressure
(10 PSI to 100 PSI)
- Exclusive "Delta Cell" high frequency design
- "Slow start" frequency driver
- Limited to 3-4 ppm dissolved ozone
(Higher ozone levels can create excessive off-gas)
- 20 amp GFCI protection
- Soft rubber pneumatic wheels for ease in portability
- Exclusive contacting and degassing configuration
- Side stream injection for maximum mass transfer efficiency
- Door safety interlock
- On-board oxygen concentrator
- Ozone destructor
- Flow and temperature controlled
(Will not accept a hot water feed)
- Integrated water-cooled ozone cell for enhanced quality and long term reliability
|
|
Benefits & Applications Include:
|
- Wash wine barrels and tanks
- Clean and deodorize floors, walls, restrooms, boot and bins
- Deodorize and sanitize produce trucks, cold storage rooms
- Clean-in-place system for final sanitizing rinse
- Spray bars to replace chlorine
- Connects to belts and conveyors for mold control
- Clean, then destroy microbial contaminants on deck and fish holding
areas of commercial fishing boats
- Reduces hot water usage and replaces aggressive chemical surface sanitizing
|
|
Recommended Safety Options:
Dissolved ozone monitoring capability.
For safety reasons associated with ozone off-gas in the work area,
it is highly recommended that an ambient ozone monitor be utilized
during the ozone spray and sanitize phase.
Our Mobile Ozone Microbial Reduction Systems
Are designed to meet the requirements necessary for surface microbial destruction within a myriad of applications.
The use of ozone resistant materials throughout the system culminates in long-term reliability.
Ozotech, Inc. can expand or re-configure our systems to meet most any application or budget requirement.
Replacement parts are listed in the operation and maintenance manual supplied with the equipment.
Shipping & Lead Time:
Approx. Shipping Weight: 250 LBS
Dims: 24"W x 28"D x 48"H (Cart = 43"W x 25"D x 40"H)
Estimated lead-time: 3-6 weeks ARO